Masport President 2000AL PDF Manual

Brand: Masport Rating: 3.8 Votes: 6

Manual Type: PDF manual Manual Pages: 16 Manual Language: English

Product specification

The Masport President 200AL is a high-quality lawnmower designed specifically for residential lawn care needs. With its powerful Briggs & Stratton 140cc engine and an 18-inch cutting width, this mower can easily tackle small to medium-sized lawns.

One of the standout features of the Masport President 200AL is its adjustable cutting height, which allows users to customize their grass length anywhere between 10 to 70mm. This feature ensures that you can achieve the perfect lawn height to suit your preferences.

Durability is key when it comes to outdoor equipment, and the Masport President 200AL delivers. Made with a robust steel deck, this mower can withstand tough conditions and continue to perform efficiently for years to come.

Efficiency is another area where this lawnmower excels. It comes with a fabric catcher that has a generous capacity of 46 liters, enabling you to collect grass clippings without frequent emptying. This makes the mowing process more convenient and time-saving.

Maneuvering the Masport President 200AL is a breeze, thanks to its user-friendly handlebar controls that allow easy navigation. Its quick-cut blade ensures a clean and precise cut, leaving your lawn looking well-maintained and neat.

Safety is taken seriously with this mower. It is equipped with a zone start safety system that prevents accidental startups, giving you peace of mind while operating the machine.

In conclusion, the Masport President 200AL is an exceptional choice for homeowners seeking a reliable and efficient lawnmower. Whether you require meticulous grass length customization or easy maneuverability, this mower has got you covered. Its durability, ease of use, and adjustable cutting height make it a solid option for any lawn care needs.

Shop Masport President 2000AL Parts & Accessories

Blades Tires Spark Plugs Wheels Fuel Lines Filters Gas Tanks Oils

General

Brand:	Masport
Model:	President 200AL
Product:	Lawnmower
Language:	English
Filetype:	User manual (PDF)

FAQs

How short should I cut the grass?

When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.

What should I do if the Masport President 200AL lawnmower is not cutting the grass evenly?

If the Masport President 200AL lawnmower is not cutting the grass evenly, you can try the following steps: 1. Check the mowing chamber: Clean the mowing chamber frequently to remove any grass build-up. This will help maintain optimal mowing performance, especially when mulching. Avoid cutting the lawn when it is wet, as wet grass tends to form clumps and interfere with the mulching action of the mower. 2. Adjust mowing pattern: If you are not collecting the cut grass, mow in a pattern that deposits the clippings on the previously cut swathe. For example, if the mower discharges clippings on the left, the next cut should be to the right of the previous one, and vice versa. This helps distribute the clippings more effectively. 3. Consider using a grass delivery chute: If you frequently mow without collecting the clippings, using an accessory grass delivery chute (available from your dealer for most models) can assist in spreading the clippings more effectively. 4. Check blade sharpness: Ensure that the mower's blade is sharp. A dull blade tends to tear the grass instead of cutting it cleanly. Sharpen the blade if necessary to improve cutting performance. 5. Adjust cutting height: Avoid using the lowest two or three cutting height settings when mulching, especially in wet or very long grass. Cutting off only the top third (or less) of the grass will help maintain optimal mulching performance. By following these steps, you should be able to improve the evenness of grass cutting with the Masport President 200AL lawnmower.

Is the manual of the Masport President 200AL available in English?

Yes, the manual of the Masport President 200AL is available in English.

Can I mow the lawn when the grass is wet?

You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.

How often should I cut the grass?

In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.

How do I start the Masport President 200AL lawnmower?

To start the Masport President 200AL lawnmower, follow these steps: 1. Check the fuel level: Ensure that there is enough fuel in the lawnmower's fuel tank. 2. Check the oil level: Verify that the oil level is within the recommended range. If it is low, add the appropriate type and amount of oil. 3. Prime the engine: Locate the primer bulb on the lawnmower's engine and press it several times to prime the fuel system. 4. Set the choke: Move the choke lever to the 'Start' or 'Choke' position. This helps provide the engine with the necessary fuel mixture for starting. 5. Pull the starter cord: Firmly grasp the starter cord handle and give it a quick, smooth pull. This should start the engine. 6. Release the choke: Once the engine has started, gradually move the choke lever to the 'Run' or 'Open' position. 7. Warm up the engine: Allow the engine to run for a few minutes to warm up before engaging the cutting blades or mowing. Please note that these steps are based on the Masport President 200AL lawnmower manual and may vary slightly depending on the specific model or version.

What should I do if the Masport President 200AL lawnmower is not starting?

If the Masport President 200AL lawnmower is not starting, you can try the following steps: 1. Check the fuel level: Ensure that there is enough fuel in the lawnmower's fuel tank. 2. Turn on the fuel tap (if applicable): If your lawnmower has a fuel tap, make sure it is turned on. 3. Prime the engine: For manual start models, set the engine control to the CHOKE position. If your lawnmower has a Pulsa Prime engine, push the primer bulb on the side of the engine near the carburetor. Repeat this step if you have just refilled the fuel tank. 4. Pull the starter cord: Grasp the starter grip and pull it slowly until you feel resistance, then pull forcefully to start the engine. Repeat this step until the engine starts. Avoid pulling the cord with a jerk or releasing it until fully rewound. 5. Adjust the engine control: Once the engine starts and warms up, move the engine control to the desired speed. 6. Clear flooding (if necessary): If the engine does not start due to flooding, move the engine control to SLOW and pull the starter cord six times to clear the flooding. 7. For electric start models, refer to the Electric Start instructions provided with your lawnmower. By following these steps, you should be able to troubleshoot and start the Masport President 200AL lawnmower successfully.

How do I clean the grass clippings from the Masport President 200AL lawnmower?

To clean the grass clippings from the Masport President 200AL lawnmower, you can follow these steps: 1. Clean the mowing chamber: Regularly clean the mowing chamber to remove any grass build-up. This will help maintain optimal mowing performance, especially when mulching. Avoid cutting the lawn when it is wet, as wet grass tends to form clumps and interfere with the mulching action of the mower. 2. Clear the grass chute: If the grass clippings are accumulating in the grass chute, stop the engine and make sure the blade has stopped rotating. Remove the spark plug wire for safety. Empty the grass from the catcher by holding it vertically or using the rear handle of the catcher. Shake if necessary to dislodge a full load. 3. Maintain the grass catcher: If your lawnmower has a fabric grass catcher, wash it as needed to restore and open the mesh. Do not leave the catcher in direct sunlight when not in use, as prolonged exposure can cause premature breakdown of the material. For molded plastic catchers, keep the air outlet mesh clear by hosing it frequently. By following these steps, you can effectively clean the grass clippings from the Masport President 200AL lawnmower and ensure optimal performance.

How do I adjust the cutting height of the Masport President 200AL lawnmower?

To adjust the cutting height of the Masport President 200AL lawnmower, follow these steps: 1. Locate the single point cut height control: This control allows you to adjust the cutting height of all four wheels simultaneously. 2. Steady the lawnmower: Grasp the handle of the lawnmower with one hand to keep it steady. 3. Pull the lever outwards: With your other hand, pull the lever outwards from the lawnmower. 4. Move the lever to the desired setting: While holding the lever, move it to the desired cutting height setting. The cutting height options may be indicated on the lever or nearby. 5. Release the lever: Once you have selected the desired cutting height, release the lever. It should lock into place. 6. Verify the cutting height: Check that all four wheels are set to the same cutting height by visually inspecting them. By following these steps, you can easily adjust the cutting height of the Masport President 200AL lawnmower to suit your lawn maintenance needs.