Husqvarna R 112C PDF Manual

Brand: Husqvarna Rating: 4.5 Votes: 14

Manual Type: PDF manual Manual Pages: 140 Manual Language: English

Product specification

Introducing the Husqvarna R 112C lawnmower, designed specifically for use in residential settings. With its compact design, this lawnmower is perfect for easy maneuverability in small to medium-sized yards.

Powered by a dependable gasoline engine, the Husqvarna R 112C provides sufficient power to effectively cut grass. Its cutting deck boasts an adjustable cutting height, giving users the ability to achieve their desired grass length.

The lawnmower’s cutting width is suitable for efficient mowing in various lawn conditions, ensuring a thorough job every time. Equipped with a grass collector bag, the Husqvarna R 112C efficiently collects grass clippings during operation, eliminating the need for manual raking or additional cleanup.

The handle of this lawnmower is ergonomically designed for comfortable operation, minimizing user fatigue. Additionally, it features a foldable design for easy storage and transportation.

Safety is a top priority with the Husqvarna R 112C. Its blade brake stops the cutting blade quickly when needed, providing peace of mind during operation. The lawnmower also includes a safety switch to prevent accidental starting.

Overall, the Husqvarna R 112C is a reliable and efficient lawnmower, ideal for residential use. Its compact design, adjustable cutting height, and grass collector bag contribute to a hassle-free mowing experience.

Shop Husqvarna R 112C Parts & Accessories

Blades Tires Spark Plugs Wheels Fuel Lines Filters Gas Tanks Oils

General

Brand:	Husqvarna
Model:	R 112C
Product:	Lawnmower
Language:	English
Filetype:	User manual (PDF)

FAQs

Is the manual of the Husqvarna R 112C available in English?

Yes, the manual of the Husqvarna R 112C is available in English.

How short should I cut the grass?

When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.

How can I adjust the cutting height on my Husqvarna R 112C lawnmower?

Locate the cutting height adjustment lever near the wheels and then move it to the desired position for the desired cutting height, ensuring that all wheels are properly aligned.

What should I do if the lawnmower blades are dull or damaged?

You can easily replace or sharpen your lawnmower blades by removing the blade bolt, swapping out the blades, and securely tightening the bolt. Make sure to handle the blades with caution.

Can I mow the lawn when the grass is wet?

You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.

Why won't my Husqvarna R 112C lawnmower start?

Ensure that the fuel tank is filled with fresh gasoline, the spark plug is clean and properly connected, and that the engine stop lever is raised.

Why is my Husqvarna R 112C lawnmower not cutting the grass evenly?

Check that the cutting deck is properly leveled. Adjust the cutting height on all sides if needed. Also, ensure that the blades are sharp and not damaged. If necessary, sharpen or replace them as mentioned in the manual.

How often should I cut the grass?

In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.

How often should I clean the air filter on the Husqvarna R 112C lawnmower?

It is recommended to clean or replace the air filter every 25 operating hours or at least once per mowing season. Follow the instructions in the manual to properly access, clean, or replace the air filter.

Comments

Hunter Bergnaum

To change the cutting unit drive belt on the Husqvarna R 112C lawnmower, follow these steps: 1. Park the lawnmower on flat ground and engage the parking brake. 2. Slide the cutting unit and ensure that the guide bolts are inserted into the tracks on the equipment frame. 3. Adjust the pipes on the cutting unit with the pipes on the equipment frame. 4. Hold the cutting unit with both hands and push it in until the pipes and bolts reach the bottom. 5. Attach the drive belt according to the illustration. 6. Attach the tension spring to provide tension to the drive belt. 7. Attach the drive belt cover. 8. Set the cutting height lever to a position between 1-5. To remove the cutting unit: 1. Park the lawnmower on flat ground and engage the parking brake. 2. Set the cutting height lever to the service position (S). 3. Activate the lifting lever for the cutting unit. 4. Loosen the clip and remove the drive belt cover. 5. Disconnect the spring for the drive belt to release the tension. 6. Remove the drive belt. 7. For the Husqvarna R 112C and R 112C5 models, hold the cutting unit with both hands and pull it out. Lift the cutting unit and place it against the lawnmower or a wall. 8. For the Husqvarna R 115C model, hold the cutting unit with both hands and pull it out until it stops. 9. Lift the locking mechanism for the equipment frame in a vertical position. Be careful as the locking lever can cause finger injuries if not handled carefully. 10. Remove the pins to disconnect the rods from the cutting unit.

Penelope Treutel

How do I change the belt for the cutting unit on a 112C lawnmower? Is there a video available?

Gabriel Paucek

The suspension for the cutting unit on the Husqvarna R 112C can be seen in the exploded view.

Ramiro Kemmer

What does the suspension for the cutting unit look like on an exploded view? On the 112c.

Keva Stracke

How do I change the drive belt for the cutting unit?

Jeanie Kris

To replace the belt for the cutting unit on the Husqvarna R 112C lawnmower, follow these steps: 1. Park the lawnmower on flat ground and engage the parking brake. 2. Push in the cutting unit and make sure the guide screws are inserted into the grooves on the equipment frame. 3. Adjust the pipes on the cutting unit with the pipes on the equipment frame. 4. Hold the cutting unit with both hands and push it in until the pipes and bolts reach the bottom. 5. Attach the drive belt according to the illustration. 6. Attach the tension spring to keep tension on the drive belt. 7. Attach the drive belt cover. 8. Set the cutting height adjustment lever to a position between 1-5. To remove the cutting unit: 1. Park the lawnmower on flat ground and engage the parking brake. 2. Set the cutting height adjustment lever to the service position (S). 3. Move the lifting lever for the cutting unit to the operating position. 4. Loosen the clip and remove the drive belt cover. 5. Loosen the spring for the drive belt to release the tension. 6. Remove the drive belt. 7. For the Husqvarna R 112C and R 112C5 models, hold the cutting unit with both hands and pull it out. Lift the cutting unit and place it against the lawnmower or a wall. 8. For the Husqvarna R 115C model, hold the cutting unit with both hands and pull it out until it stops. 9. Lift the equipment frame lock to a vertical position. Be careful as the locking mechanism can cause finger injuries if not used carefully. 10. Remove the pins to disconnect the attachment from the cutting unit.

Ferdinand Dubuque

How to put the cutting deck in a vertical position?

Kandace Strosin

To raise the cutting deck vertically on the Husqvarna R 112C lawnmower, follow these steps: 1. Set the cutting height lever to a position between 1 and 5. 2. To remove the cutting deck, park the lawnmower on a flat surface and apply the parking brake. 3. Set the cutting height lever to the service position (S). 4. Place the cutting deck lifting lever in the operating position. 5. Release the clamp and remove the transmission belt cover. 6. Disengage the transmission belt spring to loosen the belt tension. 7. Remove the transmission belt. 8. For the R 112C and R 112C5 models, hold the cutting deck with both hands and pull it. Lift the cutting deck and place it against the lawnmower or a wall. 9. For the R 115C model, hold the cutting deck with both hands and pull it until it stops. 10. Lift the equipment chassis lock into the vertical position. Make sure the equipment chassis lock is in the fully vertical position. 11. Remove the pin to disconnect the cutting deck arm.