Honda Izy HRG465C3 PDF Manual

Brand: Honda Rating: 4.1 Votes: 8

Manual Type: PDF manual Manual Pages: 16 Manual Language: English

Product specification

The Honda Izy HRG465C3 is a powerful lawnmower designed for residential use. Its 160cc four-stroke engine delivers ample power for cutting grass in all sizes of lawns.

With an air-cooled engine capacity of .6 liters, this lawnmower provides a maximum output of 4.5 horsepower at 2,800 rpm. It guarantees reliable performance and efficient grass cutting.

Featuring an 18-inch cutting width, the Honda Izy HRG465C3 is perfect for small to medium-sized gardens. Its cutting height can be adjusted to one of six positions, ranging from 20mm to 74mm, allowing for a precise cut tailored to different grass lengths.

Equipped with a fabric grass bag that holds up to 55 liters of clippings, this lawnmower also offers a rear discharge option for users who prefer not to collect the clippings.

Safety is a top priority with the Honda Izy HRG465C3. It is equipped with a safety brake that stops the blade within three seconds of the operator releasing the handle, ensuring user protection.

Constructed with premium materials, this lawnmower guarantees durability and reliability over time. It is incredibly easy to operate and is suitable for both novice and experienced users.

For its price, the Honda Izy HRG465C3 is an outstanding lawnmower that provides excellent value. Get ready to effortlessly maintain your lawn with this dependable and efficient machine!

Shop Honda Izy HRG465C3 Parts & Accessories

Blades Tires Spark Plugs Wheels Fuel Lines Filters Gas Tanks Oils

General

Brand:	Honda
Model:	Izy HRG465C3
Product:	Lawnmower
Language:	English
Filetype:	User manual (PDF)

FAQs

Why is my lawnmower not cutting the grass evenly?

Is the blade dull or damaged? You might need to sharpen or replace it to ensure a clean and even cut.

Is the manual of the Honda Izy HRG465C3 available in English?

Yes, the manual of the Honda Izy HRG465C3 is available in English.

My lawnmower seems to be overheating, is that normal?

No, it's not normal for the lawnmower to overheat. Check if the air filter is clean and unclogged. Also, make sure the engine cooling fins are free from debris and dirt.

How often should I cut the grass?

In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.

Why won't my Honda Izy lawnmower start?

Have you checked if the fuel tank is empty? If so, try refilling it with fresh unleaded gasoline.

How can I adjust the cutting height on my Honda Izy lawnmower?

Is the blade dull or damaged? You might need to sharpen or replace it to ensure a clean and even cut.

Can I mow the lawn when the grass is wet?

You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.

Why is my Honda Izy lawnmower vibrating excessively during operation?

Excessive vibration could be due to an unbalanced blade or loose bolts. Check if the blade is securely fastened and balanced. If not, tighten the bolts and consider having the blade professionally balanced.

How short should I cut the grass?

When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.

Comments

Brock Vandervort

What is the reference of the traction cable and how is it installed? I can't get the wheels to pull.

Cody Nienow

The reference for the pull cable for the Honda Izy HRG465C3 lawnmower is not specified in the available manual. However, you can follow these general steps to install the pull cable: 1. Locate the pull cable on the lawnmower. 2. Remove any cover or panel that may be obstructing access to the cable. 3. Disconnect the old pull cable, if present, by loosening any fastener or clamp. 4. Take note of the route of the old cable to ensure proper installation of the new cable. 5. Install the new pull cable following the same route as the old cable. 6. Secure the cable in place using the appropriate fasteners or clamps. 7. Test the traction by activating the traction system and verifying if the wheels move correctly.